EN AW 5005 Aluminum Sheet

Home » aluproducts » EN AW 5005 Aluminum Sheet

EN AW 5005 Aluminum Sheet

Aluminum Sheet Alloy: 5005

Temper: O, H111, H32, H34, H36, H38, H112

Thickness: 0.2mm – 6mm, 6mm – 200mm; (DC Material)

Thickness tolerance: +/-0.02mm, Width & Length tolerance: -0 / +2mm. Diagonal line (+/- 2mm)

Surface: mill finish surface, bright, polished surface, with blue PVC films or paper-interleaved;

EN AW 5005 Aluminum Sheet

5005 Aluminum Sheet Manufacturer and Supplier in China for Over 15 Years， large ready stock available

EN AW 5005 Aluminum Sheet h34 aluminum sheet is similar to alloy 3003 with medium strength and good corrosion resistance. Used as a conductor, cookware, instrument panels, shells and architectural trim. The hard anodizing film is brighter than the oxide film 3003 and is consistent with the hue of 6063.

5005 Aluminum sheet is often used when the material will be anodized and deployed in an architectural application like flashings, sills, curtain walls, etc. Architects often specify 5005 alloys for anodized aluminum architectural metalwork.

Applications:

1) Aircraft, automobile, train

2) Building walls, ceilings, furniture cabinets, lighting plate

3) Shipping plate, solar reflective plate, Corner protector, insulation material

4) Beverage bottle, cap, ring-pull, cosmetics shell, and cover

5) Aluminum tread/embossed plate, quenched and pre-stretched plate

6) PS baseplate, CTP baseplate, Signs, nameplate

7) Electrical products shell, engineering machinery plate

8) Aluminum reefer containers and special containers, etc.

9) Spinning, Auto, etc.

10) Printed aluminum sheet

11) Aluminum Sheet For Bus Skins

Look more at our website and our B2B website .

5005 PROPERTIES AND ADDITIONAL INFORMATION:

>General Features

5005 is a non-heat treatable alloy with magnesium content. It can be strengthened (hardened) by cold working. It scores well in weld-ability, formability, and corrosion resistance (especially when anodized).

>Forming

5005 has excellent formability, especially in softer tempers. SAF carriers 5005 H34 temper which is slightly harder and is comparable to 5052 H32 for forming.

>Welding

5005 alloy is noted for excellent welding characteristics. When 5005 material will be welded and then anodized, SAF recommends a 5356 welding wire for best color uniformity. Weld discoloration can still occur, but it is less severe than other welding alloys.

>Machining

5005 machinability is generally fairly poor. Soft 5005 tempers machine worse than harder tempers. 5005 H34 and 5005 H38 can be machined, but with much more difficulty than many other aluminum alloys.