Menu
Add Your Tooltip Text Here
1010/1050/1060
Add Your Tooltip Text Here
3003/3005/3105
Add Your Tooltip Text Here
6061/6063/6182
Add Your Tooltip Text Here
5083/5754/5052
Add Your Tooltip Text Here
2024/2014/2017
Add Your Tooltip Text Here
7075
Aluminium Sheet Plate 1050 1060 1100 etc. Alloy Aluminum Sheet
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Others: | Others: | Al: Min. |
| Each | Total | ||||||||||
| 1050 | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | – | 0.05 | 0.03 | 0.03 | – | 99.5 |
| 1050A | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | – | 0.07 | 0.05 | 0.03 | – | 99.5 |
| 1060 | 0.25 | 0.35 | 0.05 | 0.03 | 0.03 | – | 0.05 | 0.03 | 0.03 | – | 99.6 |
| 1100 | 0.95 Si + Fe | 0.05~0.20 | 0.05 | – | – | 0.1 | – | 0.05 | 0.15 | 99 | |
Aluminium Foil 1050 1060 1070 1100 1235 alloy grades
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Others: | Others: | Al: Min. |
| Each | Total | ||||||||||
| 1050 | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | – | 0.05 | 0.03 | 0.03 | – | 99.5 |
| 1050A | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | – | 0.07 | 0.05 | 0.03 | – | 99.5 |
| 1060 | 0.25 | 0.35 | 0.05 | 0.03 | 0.03 | – | 0.05 | 0.03 | 0.03 | – | 99.6 |
| 1100 | 0.95 Si + Fe | 0.05~0.20 | 0.05 | – | – | 0.1 | – | 0.05 | 0.15 | 99 | |
| 1235 | 0.65 Si + Fe | 0.05 | 0.05 | 0.05 | 0.06 | 99.35 | |||||
Property&Application
Aluminum Foil 1145/1235/1100 O Temper is mill-finished and is an excellent conductor of heat and electricity. This aluminum foil meets ASTM B479 and QQ-A-1876.
Property&Application
1000 series aluminum sheet is commonly used in some places that require high corrosion resistance and formability but not high strength. 1050 aluminum sheet is also industrial aluminum. For example, A typical application is the manufacture of chemical industry containers. In addition,1050 aluminum alloy is used for lithium battery soft connection, pole material, explosion-proof valve, PS board base, heat sink, signage, lamp, reflector, etc.
All in all, 1000 series aluminum plate has Less Tensile strength/ higher Al content/less other alloy
Aluminum plate 3003 3005 3105 Aluminum Sheet
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Others: | Others: | Al: Min. |
| Each | Total | ||||||||||
| 3003 | 0.6 | 0.7 | 0.05~0.20 | 1.0~1.5 | – | – | 0.1 | – | 0.05 | 0.15 | remainder |
| 3004 | 0.3 | 0.7 | 0.25 | 1.0~1.5 | 0.8~1.3 | – | 0.25 | – | 0.05 | 0.15 | remainder |
| 3005 | 0.6 | 0.7 | 0.3 | 1.0~1.5 | 0.2~0.6 | 0.1 | 0.25 | 0.1 | 0.05 | 0.15 | remainder |
| 3105 | 0.6 | 0.7 | 0.3 | 0.3~0.8 | 0.2~0.8 | 0.2 | 0.4 | 0.1 | 0.05 | 0.15 | remainder |
Aluminum foil 3003 3004 alloy grades
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Others: | Others: | Al: Min. |
| Each | Total | ||||||||||
| 3003 | 0.6 | 0.7 | 0.05~0.20 | 1.0~1.5 | – | – | 0.1 | – | 0.05 | 0.15 | remainder |
| 3004 | 0.3 | 0.7 | 0.25 | 1.0~1.5 | 0.8~1.3 | – | 0.25 | – | 0.05 | 0.15 | remainder |
| 3005 | 0.6 | 0.7 | 0.3 | 1.0~1.5 | 0.2~0.6 | 0.1 | 0.25 | 0.1 | 0.05 | 0.15 | remainder |
| 3105 | 0.6 | 0.7 | 0.3 | 0.3~0.8 | 0.2~0.8 | 0.2 | 0.4 | 0.1 | 0.05 | 0.15 | remainder |
Property&application
3000 series, with Mn added, it has lower ductility, and suitable for cold processing like rolling and extruding but not used in casting and forging. It is mainly used in roofing, color roofing is one of most widely used industry.
Property&application
3000 series, with Mn added, it has lower ductility, and suitable for cold processing like rolling and extruding but not used in casting and forging. 3 series aluminum alloy with manganese as the main alloy element (manganese content is 1.0-1.5%). It can not be strengthened by heat treatment, with good corrosion resistance, good welding performance and good plasticity (close to super aluminum alloy).
Aluminum plate 5005 5052 5754 5083 Aluminum Sheet
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Others: | Others: | Al: Min. |
| Each | Total | ||||||||||
| 5005 | 0.3 | 0.7 | 0.2 | 0.2 | 0.5~1.1 | 0.1 | 0.25 | – | 0.05 | 0.15 | remainder |
| 5052 | 0.25 | 0.4 | 0.1 | 0.1 | 2.2~2.8 | 0.15~0.35 | 0.1 | – | 0.05 | 0.15 | remainder |
| 5754 | 0.4 | 0.4 | 0.1 | 0.5 | 2.6~3.6 | 0.3 | 0.2 | 0.15 | 0.05 | 0.15 | remainder |
| 5083 | 0.4 | 0.4 | 0.1 | 0.4~1.0 | 4.0~4.9 | 0.05~0.25 | 0.25 | 0.15 | 0.05 | 0.15 | remainder |
Property&applicaiton
5000 series with Mg added, has lower density, higher tensile strength and high elongation. It can also be hardened by cold work, it is widely used for marine industry and aviation industry.
For Marina application, we have ABS、BV、CCS、DNV、GL、KR、LR、certificate is available， especially for Australia market.
Aluminum plate 6061 6082 Aluminum Sheet
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Others: | Others: | Al: Min. |
| Each | Total | ||||||||||
| 6061 | 0.40~0.8 | 0.7 | 0.15~0.4 | 0.15 | 0.8~1.2 | 0.04~0.35 | 0.25 | 0.15 | 0.05 | 0.15 | remainder |
| 6082 | 0.70~1.3 | 0.5 | 0.1 | 0.4~1.0 | 0.6~1.2 | 0.25 | 0.2 | 0.1 | 0.05 | 0.15 | remainder |
Property&applicaiton
6061 is precipitation hardened alloy, with Mg and Is added, it is normally heat treated to be T6 or T651. It is easily to be readily deforms into most desired shapes, and make versatile manufacturing material like windows, profiling.
Application industry includes welded assembling, marine frames, aircraft truck frames, chemical equipment, electronic parts, furniture, fasterners, heat exchangers, heat sinks.
Aluminum plate 2014 2017 2024 Aluminum Sheet
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Others: | Others: | Al: Min. |
| Each | Total | ||||||||||
| 2014 | 0.5~1.2 | 0.7 | 3.9~5.0 | 0.4~1.2 | 0.2~0.8 | 0.1 | 0.25 | 0.15 | 0.05 | 0.15 | remainder |
| 2017 | 0.2~0.8 | 0.7 | 3.5~4.5 | 0.4~1.0 | 0.4~0.8 | 0.1 | 0.25 | 0.15 | 0.05 | 0.15 | 91.5 – 95.5 |
| 2024 | 0.5 | 0.5 | 3.8~4.9 | 0.3~0.9 | 1.2~1.8 | 0.1 | 0.25 | 0.15 | 0.05 | 0.15 | remainder |
Property&applicaiton
2000 series with Cu and other alloy added, can be hardened to high strength. It is also called hard alloys. Cu increases strength and reduce ductility and corrosion resistance, which has highest strength heat treatable aluminum alloy.
2017 aluminum plate mainly used for mechanical parts, structure parts, air craft propellers.
2024 aluminum plate is widely used in mold, parts, aircraft structure, truck hub and other fields.
2A12 aluminum alloy is suitable for aircraft surface, spacer, wing rib, wing girder, rivet, structural parts of construction and transportation tools.
2A11 aluminum plate: medium-strength structural parts for aircraft, medium-strength bolts and rivets for aircraft.
2014 aluminum alloy is suitable for Aircraft heavy duty, forgings, plates and extruded materials, wheels and structural components, advanced stage rocket fuel tanks and spacecraft parts, truck frame and suspension parts.
Aluminum plate 7075 Aluminum Sheet
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Others: | Others: | Al: Min. |
| Each | Total | ||||||||||
| 7075 | 0.4 | 0.5 | 1.2~2.0 | 0.3 | 2.1~2.9 | 0.18~0.28 | 5.1~6.1 |
Property&applicaiton
7075 with zinc added, which has good mechanical property, and mainly used in aircraft structure part, gears and shafts, missile parts, aerospace/ defense application.
Type 7075 aluminum is one of the strongest aluminum alloys. Its high yield strength (>500 MPa) and its low density make the material a fit for applications such as aircraft parts or parts subject to heavy wear. While it is less corrosion resistant than other alloys (such as 5052 aluminum alloy, which is exceptionally resistant to corrosion), its strength more than justifies the downsides. Some major applications of 7075 aluminum alloy include:
Aluminum Foil 8011 alloy grade
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Others: | Others: | Al: Min. |
| Each | Total | ||||||||||
| 8011 | 0.5-0.9 | 0.6-1.0 | 0.1 | 0.2 | 0.05 | – | 0.1 | 0.08 | 0.15 | – | remain |
Property&applicaiton
Aluminum alloy 8011 is widely used in composite panel baseband, it not only keep food fresh, but also protect the food from bacteria. it is main used for medical packaging
Aluminum Foil Specs
| Application | Alloy Grade | Status | Thickness (mm) | Width（mm) |
| Pharmaceutical foil | 8079/8011/8021 | O/H18 | 0.01-0.07 | 200-1960 |
| Heat seal foil | 8079/8011 | O | 0.02-0.05 | 200-1960 |
| Hose Aluminum foil | 8079 | O | 0.01-0.02 | 200-1960 |
| Container aluminum foil | 3104/5052 | O/H24 | 0.05-0.1 | 200-1960 |
| Batter Aluminum foil | 1235/1070/1060 | H18 | 0.015-0.02 | 200-1960 |
| Chocolate Aluminum foil | 8011 | O/H22 | 0.01-0.015 | 200-1960 |
| Label Aluminum foil | 1235 | O | 0.01-0.05 | 200-1960 |
| Cigarrete Aluminum foil | 1235/8079 | O | 0.006-0.007 | 200-1960 |
| Gold card Aluminum foil | 1235/8079 | O | 0.006-0.007 | 200-1960 |
| Cooking Aluminum foil | 1235/8079 | O | 0.006-0.007 | 200-1960 |
| Soft package Aluminum foil | 1235/8079 | O | 0.006-0.03 | 200-1960 |
| Antiseptic Aluminum foil | 1235/8079 | O | 0.006-0.007 | 200-1960 |
Aluminum Foil Logistics
Aluminum Foil Manufacture
ALUMINUM FOIL QUALITY CHECKING
Q&A
What is the payment term?
Payment terms
1. new clients, we suggest LC
2. Regular clients we use TT
3. Contract client, we can do OA
How to Settle price
Lock in Time
We normally lock the price when clients give us the cofirmation based on the current day Shanghai metal exchange center
Delivery Time
Delivery time
Normally 25-45days, if anything unexpected happening, we will inform clients in advance.
Our sales will update production status every now and then.
How solve QC problem
15 days to finish all after-sale problem
We promise 15 days to solve the problem!