YK Stock Shop
Menu

Aluminum Coil/Aluminum Strip Alloy Common Grades

H91cbfaafc8cb47088545971d5b26c896y

1050/1060/1100

1060 ALUMINUM COIL

3003/3005/3105

8aluminum coils

6061/6063/6182

3aluminum coils

5083/5754/5052

alu coil 2

2021/2024/2017

Aluminum tube coil

7075

Basic Introduction for Yikuo aluminum plates

Types Series Status Spec(mm) Standard
Thickness Length
DC Material 1、 3、 5、 6、 8 Series 0、F、H112 2.0-6.0 900-2400
ASTMB209
ASME SB-209
EN485
Aluminum coil for foil making 1235 H14 0.25-0.50 740-1700 ASTMB209
Aluminum coil for color coating 1、 3、 5 series H14、H16、H18、H22、 0.18-1.00 1000-1580 ASTMB209
H24、 H26
Aluminum coil for curtain wall 1100、 3003 H12、H22、H24、H26 1.5-3.0 1000-2400 ASTMB209
5005、 5052 H22、H24、H32、H34
Aluminum coil for printing industry 1050 H18 0.14-0.28 650-1700 YS/T421
Aluminum coil for tank making 3104 H19 0.25-0.5 780-1820 YS/T435
Aluminum coil for ceiling 1、3 series H14、H24、H16、H26 0.4-1.0 200-1580 X/SWA21211
5005、 5052 H24、H22 Q/SWAJ6051
Aluminum coil for lid/cap making 8011 H16、H18 0.20-0.30 500-1700 YS/T91
Q/CHINALCO A2.8
Aluminum coil for tubing 1、 3、 8 series O、H22 0.22.5 30-1550 YS/T434
Aluminum coil for automobile 1、 2、 3、 5、 6、 7 series O、Hill、H14、H16、 0.3~4.0 900-2400 GB/T33227
(structure and spare parts) H18、H24、H26、H32、
T4P、T4
Other normal Aluminum coil 1、3、8 seriess和 O、Hix、H2x 0.20-6.0 60-2400 GB/T8544
5005、 5052 ASTMB209
5 series 0、Hix、H2x、H3x 0.3~4.0 900-2400 ASME SB-209
6 series O、H18 0.5-4.0 900-2400 EN485
Note：Coil ID 405、505、605mm, Maximum OD 2450mm，CC material is ready for most grades

Aluminium Sheet Plate 1050/1060/1100 etc Alloy Aluminum Sheet

Alloy Si Fe Cu Mn Mg Cr Zn Ti Others: Others: Al: Min.
Each Total
1050 0.25 0.4 0.05 0.05 0.05 – 0.05 0.03 0.03 – 99.5
1050A 0.25 0.4 0.05 0.05 0.05 – 0.07 0.05 0.03 – 99.5
1060 0.25 0.35 0.05 0.03 0.03 – 0.05 0.03 0.03 – 99.6
1100 0.95 Si + Fe 0.05~0.20 0.05 – – 0.1 – 0.05 0.15 99

Property&application

1050 aluminum coil is commonly used in some places that require high corrosion resistance and formability but not high strength. 1050 aluminum coil is also industrial aluminum. For example, A typical application is the manufacture of chemical industry containers. In addition,1050 aluminum alloy is used for lithium battery soft connection, pole material, explosion-proof valve, PS board base, heat sink, signage, lamp, reflector, etc.

All in all, 1000 series aluminum plate has Less Tensile strength/ higher Al content/less other alloy

Inquiry

Aluminum plate 3003 3005 3105 Aluminum Sheet

Alloy Si Fe Cu Mn Mg Cr Zn Ti Others: Others: Al: Min.
Each Total
3003 0.6 0.7 0.05~0.20 1.0~1.5 – – 0.1 – 0.05 0.15 remainder
3004 0.3 0.7 0.25 1.0~1.5 0.8~1.3 – 0.25 – 0.05 0.15 remainder
3005 0.6 0.7 0.3 1.0~1.5 0.2~0.6 0.1 0.25 0.1 0.05 0.15 remainder
3105 0.6 0.7 0.3 0.3~0.8 0.2~0.8 0.2 0.4 0.1 0.05 0.15 remainder

Property&Application

3000 series, with Mn added, it has lower ductility, and suitable for cold processing like rolling and extruding but not used in casting and forging. It is mainly used in roofing, color roofing is one of most widely used industry.

Inquiry

Aluminum plate 5005 5052 5754 5083 Aluminum Sheet

Alloy Si Fe Cu Mn Mg Cr Zn Ti Others: Others: Al: Min.
Each Total
5005 0.3 0.7 0.2 0.2 0.5~1.1 0.1 0.25 – 0.05 0.15 remainder
5052 0.25 0.4 0.1 0.1 2.2~2.8 0.15~0.35 0.1 – 0.05 0.15 remainder
5754 0.4 0.4 0.1 0.5 2.6~3.6 0.3 0.2 0.15 0.05 0.15 remainder
5083 0.4 0.4 0.1 0.4~1.0 4.0~4.9 0.05~0.25 0.25 0.15 0.05 0.15 remainder

Property&Application

5000 series with Mg added, has lower density, higher tensile strength and high elongation. It can also be hardened by cold work, it is widely used for marine industry and aviation industry.

For Marina application, we have ABS、BV、CCS、DNV、GL、KR、LR、certificate is available， especially for Australia market.

Inquiry

Aluminum plate 6061 6082 Aluminum Sheet

Alloy Si Fe Cu Mn Mg Cr Zn Ti Others: Others: Al: Min.
Each Total
6061 0.40~0.8 0.7 0.15~0.4 0.15 0.8~1.2 0.04~0.35 0.25 0.15 0.05 0.15 remainder
6082 0.70~1.3 0.5 0.1 0.4~1.0 0.6~1.2 0.25 0.2 0.1 0.05 0.15 remainder

Property&application

6061 is precipitation hardened alloy, with Mg and Is added, it is normally heat treated to be T6 or T651. It is easily to be readily deforms into most desired shapes, and make versatile manufacturing material like windows, profiling.

Application industry includes welded assembling, marine frames, aircraft truck frames, chemical equipment, electronic parts, furniture, fasterners, heat exchangers, heat sinks.

Inquiry

Aluminum plate 2014 2017 2024 Aluminum Sheet

Alloy Si Fe Cu Mn Mg Cr Zn Ti Others: Others: Al: Min.
Each Total
2014 0.5~1.2 0.7 3.9~5.0 0.4~1.2 0.2~0.8 0.1 0.25 0.15 0.05 0.15 remainder
2017 0.2~0.8 0.7 3.5~4.5 0.4~1.0 0.4~0.8 0.1 0.25 0.15 0.05 0.15 91.5 – 95.5
2024 0.5 0.5 3.8~4.9 0.3~0.9 1.2~1.8 0.1 0.25 0.15 0.05 0.15 remainder

Property&applicaiton

2000 series with Cu and other alloy added, can be hardened to high strength. It is also called hard alloys. Cu increases strength and reduce ductility and corrosion resistance, which has highest strength heat treatable aluminum alloy. 
2017 aluminum plate mainly used for mechanical parts, structure parts, air craft propellers. 
2024 aluminum plate is widely used in mold, parts, aircraft structure, truck hub and other fields.
2A12 aluminum alloy is suitable for aircraft surface, spacer, wing rib, wing girder, rivet, structural parts of construction and transportation tools.
2A11 aluminum plate: medium-strength structural parts for aircraft, medium-strength bolts and rivets for aircraft.
2014 aluminum alloy is suitable for Aircraft heavy duty, forgings, plates and extruded materials, wheels and structural components, advanced stage rocket fuel tanks and spacecraft parts, truck frame and suspension parts.
Inquiry
Fast email

Aluminum plate 7075 Aluminum Sheet

Alloy Si Fe Cu Mn Mg Cr Zn Ti Others: Others: Al: Min.
Each Total
7075 0.4 0.5 1.2~2.0 0.3 2.1~2.9 0.18~0.28 5.1~6.1

Property&applicaiton

7075 with zinc added, which has good mechanical property, and mainly used in aircraft structure part, gears and shafts, missile parts, aerospace/ defense application. 
Type 7075 aluminum is one the strongest aluminum alloys. Its high yield strength (>500 MPa) and its low density make the material a fit for applications such as aircraft parts or parts subject to heavy wear. While it is less corrosion resistant than other alloys (such as 5052 aluminum alloy, which is exceptionally resistant to corrosion), its strength more than justifies the downsides. Some major applications of 7075 aluminum alloy include:
Inquiry
Fast email
Products

Leave a Message

Inquiry
Search

guarantee with strict regulation! any problem, GM is standing by 24/7!

+86 186-2174-2353

Download brochure

Service

Contact

Facebook Whatsapp Weixin

Useful links

500 Listed Corporates collaboration

  • Thyssenkrupp
  • Volkswagen
  • China Construction Engineering