Reactor Aluminum Strip

Home » aluproducts » Reactor Aluminum Strip

Reactor Aluminum Strip

Grade:1060 1070 1350 1370
Thickness:more than 0.5mm
Width:more than 100 mm

Reactor Aluminum Strip

Reactor aluminum strip is a typical Al-Mg antirust alloy, which is famous for its extremely high fatigue strength, excellent formability and weldability. Among them, the most commonly used Reactor aluminum strip is the Reactor aluminum strip that is processed and hardened, as well as then subjected to low temperature treatment or heat to obtain stable mechanical properties. At this time, the hardness level of the 5052 aluminium alloy strip under h32 temper is 2, showing high plasticity, good weldability, and being able to be polished,etc. So, the 5052 aluminum strip with the above properties is mainly used for static load parts working in liquid or gas media, such as truck air brake tanks / fuel tanks, large marine diesel tanks, gasoline or lubricating oil conduits, various liquid containers and parts for various Marine and land transportation equipment, as well as electrical shells, cold stamping parts, sheet metal products, etc.

Look more about our website and our B2B website.

Alloy (%)	5182	5052	1050	1100	6061	6063
Si	0.2	0.25	0.25	0.95	0.40- 0.80	0.20~0.6
Fe	0.35	0.4	0.4	0.95	0.7	0.35
Cu	0.15	0.1	0.05	0.05~0.20	0.15- 0.40	0.1
Mn	0.20~0.50	0.1	0.05	0.05	0.15	0.1
Mg	4.0~5.0	2.2- 2.8	0.05	–	0.8- 1.2	0.45~0.9
Cr	0.1	0.15- 0.35	–	–	0.04- 0.35	0.1
Ni	–	–	–	–	–	–
Zn	0.25	0.1	0.05	0.1	0.25	0.1
Ti	0.1	–	0.03	–	0.15	0.1
Each (Others)	0.05	0.05	0.03	0.05	0.05	0.05
Total (Others)	0.15	0.15	–	0.15	0.15	0.15
Al	Remaining	Remaining	99.5	99	Remaining	Remaining
Single number indicates maximum content.