YK Aluminum Foil

Minimum 4.5um

1060/1235/1100

Click Here

3003/3005/3105

Click Here

8011/8021/8079

Click Here

Aluminum Foil Application

Aluminum Foil Specs

Application	Alloy Grade	Status	Thickness (mm)	Width（mm)
Pharmaceutical foil	8079/8011/8021	O/H18	0.01-0.07	200-1960
Heat seal foil	8079/8011	O	0.02-0.05	200-1960
Hose Aluminum foil	8079	O	0.01-0.02	200-1960
Container aluminum foil	3104/5052	O/H24	0.05-0.1	200-1960
Batter Aluminum foil	1235/1070/1060	H18	0.015-0.02	200-1960
Chocolate Aluminum foil	8011	O/H22	0.01-0.015	200-1960
Label Aluminum foil	1235	O	0.01-0.05	200-1960
Cigarrete Aluminum foil	1235/8079	O	0.006-0.007	200-1960
Gold card Aluminum foil	1235/8079	O	0.006-0.007	200-1960
Cooking Aluminum foil	1235/8079	O	0.006-0.007	200-1960
Soft package Aluminum foil	1235/8079	O	0.006-0.03	200-1960
Antiseptic Aluminum foil	1235/8079	O	0.006-0.007	200-1960

Aluminium Foil 1050 1060 1070 1100 1235 Alloy Grades

Alloy	Si	Fe	Cu	Mn	Mg	Cr	Zn	Ti	Others:	Others:	Al: Min.
Alloy	Si	Fe	Cu	Mn	Mg	Cr	Zn	Ti	Each	Total	Al: Min.
1050	0.25	0.4	0.05	0.05	0.05	–	0.05	0.03	0.03	–	99.5
1050A	0.25	0.4	0.05	0.05	0.05	–	0.07	0.05	0.03	–	99.5
1060	0.25	0.35	0.05	0.03	0.03	–	0.05	0.03	0.03	–	99.6
1100	0.95 Si + Fe		0.05~0.20	0.05	–	–	0.1	–	0.05	0.15	99
1235	0.65 Si + Fe		0.05	0.05	0.05			0.06			99.35

Aluminum Foil 1145/1235/1100 O Temper is mill-finished and is an excellent conductor of heat and electricity. This aluminum foil meets ASTM B479 and QQ-A-1876.

Loading...

Aluminum Foil 3003 3004 Alloy Grades

Alloy	Si	Fe	Cu	Mn	Mg	Cr	Zn	Ti	Others:	Others:	Al: Min.
Alloy	Si	Fe	Cu	Mn	Mg	Cr	Zn	Ti	Each	Total	Al: Min.
3003	0.6	0.7	0.05~0.20	1.0~1.5	–	–	0.1	–	0.05	0.15	remainder
3004	0.3	0.7	0.25	1.0~1.5	0.8~1.3	–	0.25	–	0.05	0.15	remainder
3005	0.6	0.7	0.3	1.0~1.5	0.2~0.6	0.1	0.25	0.1	0.05	0.15	remainder
3105	0.6	0.7	0.3	0.3~0.8	0.2~0.8	0.2	0.4	0.1	0.05	0.15	remainder

3000 series, with Mn, added, it has lower ductility and is suitable for cold processing like rolling and extruding but not used in casting and forging. 3 series aluminum alloy with manganese as the main alloy element (manganese content is 1.0-1.5%). It can not be strengthened by heat treatment, with good corrosion resistance, good welding performance, and good plasticity (close to super aluminum alloy).

Loading...

Aluminum Foil 8011 Alloy Grade

Alloy	Si	Fe	Cu	Mn	Mg	Cr	Zn	Ti	Others:	Others:	Al: Min.
									Each	Total
8011	0.5-0.9	0.6-1.0	0.1	0.2	0.05	–	0.1	0.08	0.15	–	remain

Aluminum alloy 8011 is widely used in composite panel baseband, it not only keep food fresh, but also protect the food from bacteria. it is main used for medical packaging