Gauge (Thickness): 0.3mm – 5mm
Width: up to 2000mm
Anodic layer: 2µm -25µm
A broad range of colours possible: 1) Clear anodizing: natural 2) Grey-Black 3) Champagne-Gold 4) Bronze 5) Stainless Steel 6) Blue g) Red”
Features of Anodized Aluminum Sheet ：1.Light weight, 1/3 weight of stainless steel 2.Anti-scratch, the surface hardness reaches Sapphire Grade 3.Non-poisonous and environmental protection 4.Anti-static, anti-fingerprint, easy to clean 5.The surface anodized layer will never fade or fall off
Application of Anodized Aluminum Sheet:1.Lighting 2.Inside and outside curtain wall 3.Automotive body 4.Home appliance board 5.Electrical Products
Anodized aluminum sheet
| Grade | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Al |
| 1050 | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | – | – | 0.05 | 99.5 |
| 1060 | 0.25 | 0.35 | 0.05 | 0.03 | 0.03 | – | – | 0.05 | 99.6 |
| 1070 | 0.2 | 0.25 | 0.04 | 0.03 | 0.03 | – | – | 0.04 | 99.7 |
| 1100 | 0.95 | 0.05-0.2 | 0.05 | – | – | 0.1 | – | 99 | |
| 1200 | 1 | 0.05 | 0.05 | – | – | 0.1 | 0.05 | 99 | |
| 1235 | 0.65 | 0.05 | 0.05 | 0.05 | – | 0.1 | 0.06 | 99.35 | |
| 3003 | 0.6 | 0.7 | 0.05-0.2 | 1.0-1.5 | – | – | – | 0.1 | remaining |
| 3004 | 0.3 | 0.7 | 0.25 | 1.0-1.5 | 0.8-1.3 | – | – | 0.25 | remaining |
| 3005 | 0.6 | 0.7 | 0.25 | 1.0-1.5 | 0.2-0.6 | 0.1 | – | 0.25 | remaining |
| 3105 | 0.6 | 0.7 | 0.3 | 0.3-0.8 | 0.2-0.8 | 0.2 | – | 0.4 | remaining |
| 3A21 | 0.6 | 0.7 | 0.2 | 1.0-1.6 | 0.05 | – | – | 0.1 | remaining |
| 5005 | 0.3 | 0.7 | 0.2 | 0.2 | 0.5-1.1 | 0.1 | – | 0.25 | remaining |
| 5052 | 0.25 | 0.4 | 0.1 | 0.1 | 2.2-2.8 | 0.15-0.35 | – | 0.1 | remaining |
| 5083 | 0.4 | 0.4 | 0.1 | 0.4-1.0 | 4.0-4.9 | 0.05-0.25 | – | 0.25 | remaining |
| 5154 | 0.25 | 0.4 | 0.1 | 0.1 | 3.1-3.9 | 0.15-0.35 | – | 0.2 | remaining |
| 5182 | 0.2 | 0.35 | 0.15 | 0.2-0.5 | 4.0-5.0 | 0.1 | – | 0.25 | remaining |
| 5251 | 0.4 | 0.5 | 0.15 | 0.1-0.5 | 1.7-2.4 | 0.15 | – | 0.15 | remaining |
| 5754 | 0.4 | 0.4 | 0.1 | 0.5 | 2.6-3.6 | 0.3 | – | 0.2 | remaining |
Anodized aluminum sheet
"15 days to finish all aftersale problem" is our CEO promise and requirement for our QC team.
Full range production lines which guarantee the delivery of our orders. If there is any production limit, we will inform clients in advance.
Anodized aluminum sheet
Anodized aluminum sheet
Anodized aluminum sheet
Before production, Yikuo will check the raw material like the aluminum casting billet. During the production, we will sampling on the mechanical property. After production, we will check carefully about the package and label.
Anodized aluminum sheet
Every detail matters. label, pallet, desiccant，steel bundle, wooden frame,
Pallet Limit 1-1.8MT per pallet，edge projection is needed. Free Fumigation pallet is applied.
2 layer of protection film is applied. 1 water proof and 1 kraft paper to protect from damage
Worry free in the sea transportation, and make full use of container space.
1.0-3.0 tons per box weight control to guarantee the safety
Inside water proof film with outside strengthen plastic package
Easily loading and unloading, strengthen strip bundle is applied.
More than 10 years oversea experience
guarantee with strict regulation! any problem, ceo is standing by 24/7!
